Manunited28 asked:


I bowl left-handed fast and left-handed leg/off spin. In the middle of the over that I started with fast bowling, can I switch to spin and then switch back to fast again?

RODOLFO

? Vallen asked:


I am searching for a bowling ball and preferably Hello Kitty. The only one they seem to have is the Hello Kitty Viz-a-ball and its plastic…what is the difference between a plastic bowling ball and ones you would use at a bowling alley?? thanks!

DINO

The Bowling Coach asked:


Most bowling pins used in a casual game of bowling are pins that were specified by the American Bowling Congress. Kingpins in bowling are one of the most popular pins used in tournaments and leagues. They are much bigger than the normal sized pins. Professional bowlers use a big ball to knock down these pins.

In ten-pin bowling, they also use a big ball to knock down the pins. Ten-pin is more popular in European countries like England and Germany. In the United States, cities in New Hampshire, Massachusetts, and Brunswick have popularized this game and exported it to neighboring states and cities.

This game uses candlepins as their target. They are not removed from the lane after each attempt as they are in kingpin bowling. The lanes that are used in candlepin bowling are not oily compared to kingpin bowling, where the lanes are heavily oiled to meet professional tournament regulations.

Another kind of bowling that was also accepted by many people is the duckpin bowling. The game was popularized on the East Coast but originated in Baltimore as a summer sport when other bowling had declined in popularity. Duckpin bowling reached its peak of attraction in the 1960’s where it had spread its popularity along the Atlantic Coast from the states of Georgia to Maine.

When manufacturers of pin machine settings stopped producing the equipment, duckpin bowling waned in popularity. There are still bowling alleys for duckpin bowling in several cities in the states of Massachusetts and Connecticut.

Kingpin bowling is sanctioned by most bowling organizations for tournaments and leagues. It is the standard game for many professional bowlers in every bowling event held by Brunswick, because of the big size pins and balls, which are standardized by the American Bowling Congress.

For the casual players that just want to knock down kingpins in kingpin bowling, here are some tips to improve your scoring:

1. He must find what he thinks to be the best starting position in front of the lane.

2. He may walk towards the foul line with the dots that mark his starting position.

3. He must turn around facing his back to the kingpins.

4. After relaxing, he may face the pins and concentrate on his aim.

5. Roll the ball to the lane and follow through with the arms and hands.

These few basic steps would help give a better performance in kingpin bowling.



ROOSEVELT

?ôô M?n? ?ubl?tš asked:


This would take place in a bowling alley, thanks!

CLIFFORD

Ian Canaway asked:


The spin bowler is a key element in the bowling line up of any cricket team, the skill of Shane Warne and Muttiah Muralitharan has highlighted the potential and the shear power and influence a high class spin bowler can have in the game of cricket. The spin bowler can be used to slow the game, add pressure and most importantly attack batsmen. The spin bowler moves the ball off the pitch turning it sideways, as the spinning ball grips the pitch and turns and can also cause it to bounce variably.

A good spin bowler needs to be able to bowl a consistent line and length, is able to turn the ball, which requires lots of practice and dedication to succeed. If you are a spin bowler you should try and experiment with varying degrees of flight, speed, and angle of approach in order to deceive the batsmen.

There are two recognised types of spin bowlers, which are, finger spinners who are classed as the orthodox technique and use their index finger (first finger) to spin the ball and the wrist spinners who use the wrist more than fingers to spin ball.

Target areas:

Off spin: The off spinner aims to spin the ball from a right handed batsmen’s off side towards the leg side. Try to bowl just outside of the off stump so that the ball turns and hits the stumps, also try to entice the batsmen forward on to the front foot by bowling a full length.

Leg spin: The leg spinner aims to bowl the ball so that it spins from a right handed batsmen’s leg side to the off side. Again try to pitch the ball up to the batsman to get them coming forward. Pitch the ball inline with the wickets so that the ball turns to hit the top of the off stump.

The grip:

Leg spin: Use the first two fingers to grip the ball horizontally across the seam, your third finger should be bent and running along the seam. Your thumb should rest lightly on seam and the spin is generated primarily by the third finger.

Off spin: Again grip the ball with your first two fingers horizontally across the seam and try to spread as wide as possible apart the joints of index and middle finger. The ball then rests lightly on third finger and thumb, the spin is and produced and passed on mainly through the index finger.

The delivery:

The off spin delivery, should start with an angled and short delivery stride. You should then pivot on ball of the front foot keeping your bowling arm high. **** your wrist inwards and drive your back leg through to help rotate the body. Release the ball by turning your wrist sharply from left to right and by pulling down on seam with the index finger to generate spin. The back of hand should face the off side or upwards at finish of the delivery, don’t forget to follow through properly. Keep your head as upright as possible throughout the delivery and your eyes fixed on the target at all times.

The leg spin delivery is very similar to the off spin except with a few subtle and important variations. Your approach should be somewhat longer and have a slightly angled approach towards the target.

As you bowl you should raise your lead arm towards the target and bowl with a braced front leg (your weight should be through this leg). Pivot on the ball of the lead foot and bring your bowling arm up high with your wrist cocked outwards. Drive your back leg through and release the ball. Generate the spin by rotating your wrist from right to left and by most importantly using the third finger to impart the most spin. Finish with your palm facing leg side.

Follow through by rotating shoulders through the line of the wickets and driving your back leg through the action so that your hips rotate over your front foot. Keep your hips and shoulders inline and head as upright as possible throughout the delivery and your eyes fixed on the target at all times.

The Googly and the Doosra: Deceptive deliveries

The googly is bowled by a leg spinner and is a ball that appears to look like a leg spinner when it’s bowled but then moves unexpectedly in the opposite direction after it pitches. It’s bowled out of the back of the hand and requires the shoulder to be dropped a little at the point of release. A great example of a bowler who has mastered the googly is Shane Warne.

The doosra is bowled by an off spinner and is a ball that initially seems to look like an off spinner when it’s bowled but then moves unexpectedly in the opposite direction after it pitches. The doosra has been pioneered by the Sri Lanka great Muttiah Muralitharan and is very difficult to bowl, Muralitharan reputedly practiced the delivery for 2-3 years in the nets and practice before using it in first class cricket…I can’t bowl it so I’m not going to go into it!

The power and rotation on the ball are generated through a strong action and is enhanced by flicking the wrist and straightening the fingers at the point of release. Always try and spin the ball as much as you can, your consistency and accuracy will come with practice and hard work. Remember to bowl your spinners with oomph and purpose, don’t just throw it up and hope for the best.

Tip- Examine the pitch before bowling and try to identify areas of rough, cracks and other features on the wicket to aim at which may cause increased spin, variable bounce or erratic ball behaviour when pitched on and aim to bowl the ball into these areas provided they don’t cause you to bowl bad deliveries (e.g. short and wide).



FIDEL

Michael B asked:


I **** using the “house balls” at bowling alleys, so it’s time for me to get my own ball. I’m a recreational bowler, pretty much straight shooter, so it doesn’t make sense for me to get the highest tech, most expensive ball. On the other hand, I am trying to get better, so it doesn’t make sense for me to have the cheapest “kiddie” ball, either. So my question is actually two-fold:

What considerations should I keep when choosing a bowling ball? What manufacturer? What material?

And, more specifically, can anyone recommend the best bowling ball for my criteria?

BENNETT

John Tenn asked:


We’ve heard it many times before… practice makes perfect. And for good reason-it’s the truth! The best way to get better at anything is to practice; bowling is no exception. However, how you practice will mean the difference between slowly improving and supercharging your game!

Bowling Tip #1: Use the right tools

In any sport, using the correct equipment for the job you have to do improves your performance. In bowling, the ball is the most important piece of equipment you will use, so choose the right one for the job! Be sure to try out many, and select one that’s the right weight, material and finger-grip fit.

Bowling Tip #2: Are you bowling enough?

To progress at bowling, you need to bowl at least once or twice a week. The most economical way to get this amount of practice in is by joining a league. Usually, the more experienced players show up before the game to practice. This is when you can learn the most, from people committed to the sport.

Bowling Tip #3: Learn to walk the walk

While professional bowlers tend to use a 5-step approach, that’s just not suitable for someone just learning the sport. Beginners are usually more comfortable with a 4-step approach. You can practice your approach without throwing a single ball. Keep your shoulders square to the front, your head up, arm swing smooth, and your pace consistent and even.

Bowling Tip #4: Let ‘em roll

Spend time rolling the ball. A bowling ball should never be thrown. How do you tell the difference? A thrown ball will land with a loud “clunk” and then slide a few feet before beginning to roll. A rolled ball lands quietly and quickly rolls down the lane. If you find that you’re in the habit of throwing the ball, simply slow down. Try taking a slow, deep breath or two before bowling to settle any anxiety. You will hit more pins with a rolled ball than with a thrown one.

Bowling Tip #5: What you think is what you do

Spend time visualizing and analyzing your shots. Visualize your movements and your shots before you do them. If your ball goes consistently too far right, begin a little further left. You will learn to “feel” when you’ve bowled a good ball. When you do, write it down before you forget. What did you do? How did the ball feel? Where did the ball hit? Keep it for future reference so you can do it again.

Bowling Tip #6: What if I can’t be at the alley enough to practice?

Any smooth surface with a long, clear distance is suitable for practicing your approach. It’s not safe to practice the release, however, as a bowling ball will easily roll straight through walls if you miss your target! Not to mention you’ll ruin the surface of your ball. When practicing at home, mark your foul line and arrows in masking tape or other material that will not damage your floor. Also mark where your toes need to be for each step. Practice your approach until it’s second nature.

You can practice your arm swing outdoors with a bucket of water with a small hole at the bottom. The water drops on the ground will mark the path of your arm and the direction the ball would go. It’s a good way to see if you arc around your body when you bowl and which direction your arm is going. This can be a very enlightening experience.

Bowling Tip #7: Don’t spare yourself the trouble

It’s a very good idea to practice picking up your spares. A bowler who can consistently pick up his spares can easily hold a 180 average without getting any strikes. It’s especially useful to practice bowling at the 7-or 10-pins by aiming at them and bowling across the strike zone (the “x” on the lane) from the opposite side of the lane.

By practicing these bowling techniques on a regular basis, you’ll be honing the skills that will help you improve your bowling game!



DONNIE

The Bowling Coach asked:


Bowling balls can be made of rubber, plastic or urethane. Serious bowler can order a custom made ball instead of always borrowing or renting one from the bowling alley.

Since balls are made of different materials, the performance of each varies depending on the floor surface. Bowling balls can be ordered in different weights. They range from 12 to 16 pounds and will work for any bowler, regardless of gender or age.

The Brunswick ‘Scorchin Inferno’ bowling ball is a good example. This high performance model is an upgrade from the ‘Ultimate Inferno’ and has proven to be one of the best sellers in the company’s inventory. It’s cover stock is the ‘Activator Max’ and performs best when used in a lane that requires heavy oil.

Another good ball is the ‘Columbia Action Packed Bowling Ball’. This high performance ball does well and works best under medium lane conditions. Its cover stock is the ‘M80^2’ and is guaranteed to do well for the player who likes to make strikes.

The elite ‘R43’ bowling ball is one that can work in light or heavy oil conditions. Manufactures claim that the weight block, which is the energy transfer core of this ball, will increase the chances of putting more pins down than any other ball because it delays the transfer of energy until the point of impact.

Proper care must be taken to ensure the bowling ball is in tip top condition at all times. This means it should not be dropped which could cause damage to the ball and injure the people around.

The ball should be kept at room temperature and stored in a bag when it is not being used to prevent stress. The owner should polish it from time to time or take it to the pro shop to be refinished.

The customized bowling ball should only be used by the owner. This is because the holes were measured only to fit the fingers of the user and not anyone else. Letting someone else use it may injure the borrower.

There are many bowling balls to choose from and the price of them range from $100 to $300. They come in many colors and designs which will stand out in the bowling alley. By looking at the conditions of the bowling alley, the bowler will find the right ball to get the job done.



SAMMY

Bernadette S asked:


I have 3 coupons for free bowling and they are from Banquet Free Game Offer and I want to know where I can use them?

CYRIL

joshlostlover… asked:


i know i could always steal them from the bowling ally but i would liek to have the option to go back some day…

BARRY